Esphome example delay: Difference between revisions
Jump to navigation
Jump to search
(Created page with "==delay== This example toggles the LED <i>when the physical button is pressed</i>, then 2 seconds later toggles it back.<br> The virtual button on the Home Assistant card is not effected. <nowiki># Physical Button on D1 (GPIO5) binary_sensor: - platform: gpio pin: number: D1 inverted: False mode: INPUT_PULLUP name: "Wemos Test Button" on_press: then: - switch.toggle: led - delay: 2s - switch.toggle: led</nowik...") |
(→delay) |
||
| Line 1: | Line 1: | ||
This example toggles the LED <i>when the physical button is pressed</i>, then 2 seconds later toggles it back.<br> | This example toggles the LED <i>when the physical button is pressed</i>, then 2 seconds later toggles it back.<br> | ||
The virtual button on the Home Assistant card is not effected. | The virtual button on the Home Assistant card is not effected. | ||
Revision as of 22:04, 27 August 2023
This example toggles the LED when the physical button is pressed, then 2 seconds later toggles it back.
The virtual button on the Home Assistant card is not effected.
# Physical Button on D1 (GPIO5)
binary_sensor:
- platform: gpio
pin:
number: D1
inverted: False
mode: INPUT_PULLUP
name: "Wemos Test Button"
on_press:
then:
- switch.toggle: led
- delay: 2s
- switch.toggle: led