Editing Esphome example switch

This example shows a toggle switch. It is either on or it's off.
That is the LED follows the switch state.

 <nowiki># A physical switch or button should be a binary sensor if you are detecting something like grounding the pin.    
# Physical Button on D1 (GPIO5)  
binary_sensor:
  - platform: gpio
    pin: 
      number: D1
      inverted: False
      mode: INPUT_PULLUP
    name: "Wemos Test Button"
    on_press:
      then:
      - switch.turn_on: led
    on_release:
      then:
      - switch.turn_off: led</nowiki>

{{template:top}}