Notebook - User contributions [en]

Esphome example switch

2023-08-28T03:17:25Z

WikiSteve:

This example shows a toggle switch on D1 (GPIO5). It is either on or it's off and it turns the LED on D0 (GPIO16) on or off.

<nowiki># A physical switch or button is a binary sensor. It is used to detect something like grounding a GPIO pin.
binary_sensor:
- platform: gpio
pin:
number: D1
inverted: False
mode: INPUT_PULLUP
name: "Wemos Test Button"
on_press:
then:
- switch.turn_on: led
on_release:
then:
- switch.turn_off: led

switch:
- platform: gpio
name: "Wemos Test LED"
pin:
number: D0
mode: output
id: led
internal : true</nowiki>

{{template:top}}
=Navigation=
[[ESPHome|Return to the ESPHome page]]

Esphome example switch

2023-08-28T03:16:03Z

WikiSteve:

Esphome example switch

2023-08-28T03:15:39Z

WikiSteve:

This example shows a toggle switch on D1 (GPIO5). It is either on or it's off and it turns the LED on D0 (GPIO16) on or off.

<nowiki># A physical switch or button is a binary sensor. It is used to detect something like grounding a GPIO pin.
binary_sensor:
- platform: gpio
pin:
number: D1
inverted: False
mode: INPUT_PULLUP
name: "Wemos Test Button"
on_press:
then:
- switch.turn_on: led
on_release:
then:
- switch.turn_off: led</nowiki>

switch:
- platform: gpio
name: "Wemos Test LED"
pin:
number: D0
mode: output
id: led
internal : true

{{template:top}}

Esphome example switch

2023-08-28T03:10:20Z

WikiSteve: Created page with "This example shows a toggle switch. It is either on or it's off. That is the LED follows the switch state. <nowiki># A physical switch or button should be a binary sensor if you are detecting something like grounding the pin. # Physical Button on D1 (GPIO5) binary_sensor: - platform: gpio pin: number: D1 inverted: False mode: INPUT_PULLUP name: "Wemos Test Button" on_press: then: - switch.turn_on: led on_release:..."

This example shows a toggle switch. It is either on or it's off.
That is the LED follows the switch state.

<nowiki># A physical switch or button should be a binary sensor if you are detecting something like grounding the pin.
# Physical Button on D1 (GPIO5)
binary_sensor:
- platform: gpio
pin:
number: D1
inverted: False
mode: INPUT_PULLUP
name: "Wemos Test Button"
on_press:
then:
- switch.turn_on: led
on_release:
then:
- switch.turn_off: led</nowiki>

{{template:top}}

ESPHome

2023-08-28T03:09:06Z

WikiSteve:

=Example Code=
:[[Esphome_example_blink|Blink]] 
:[[Esphome_example_delay|Delay]] 
:[[Esphome_example_switch|Switch]]

Template:Top

2023-08-28T03:07:05Z

WikiSteve: Created page with " ---- (TOP) "

----
[[#Index|(TOP)]]

Esphome example delay

2023-08-28T03:05:37Z

WikiSteve:

<div id="Index"></div>
This example toggles the LED when the physical button is pressed, then 2 seconds later toggles it back. 
The virtual button on the Home Assistant card is not effected.

<nowiki># Physical Button on D1 (GPIO5)
binary_sensor:
- platform: gpio
pin:
number: D1
inverted: False
mode: INPUT_PULLUP
name: "Wemos Test Button"
on_press:
then:
- switch.toggle: led
- delay: 2s
- switch.toggle: led</nowiki>

{{template:top}}
=Navigation=
[[ESPHome|Return to the ESPHome page]]

Esphome example delay

2023-08-28T03:05:10Z

WikiSteve:

This example toggles the LED when the physical button is pressed, then 2 seconds later toggles it back. 
The virtual button on the Home Assistant card is not effected.

<nowiki># Physical Button on D1 (GPIO5)
binary_sensor:
- platform: gpio
pin:
number: D1
inverted: False
mode: INPUT_PULLUP
name: "Wemos Test Button"
on_press:
then:
- switch.toggle: led
- delay: 2s
- switch.toggle: led</nowiki>

{{template:top}}
=Navigation=
[[ESPHome|Return to the ESPHome page]]

Esphome example delay

2023-08-28T03:04:34Z

WikiSteve: /* delay */

Esphome example delay

2023-08-28T03:04:21Z

WikiSteve: Created page with "==delay== This example toggles the LED when the physical button is pressed, then 2 seconds later toggles it back. The virtual button on the Home Assistant card is not effected. <nowiki># Physical Button on D1 (GPIO5) binary_sensor: - platform: gpio pin: number: D1 inverted: False mode: INPUT_PULLUP name: "Wemos Test Button" on_press: then: - switch.toggle: led - delay: 2s - switch.toggle: led</nowik..."

==delay==
This example toggles the LED when the physical button is pressed, then 2 seconds later toggles it back. 
The virtual button on the Home Assistant card is not effected.

<nowiki># Physical Button on D1 (GPIO5)
binary_sensor:
- platform: gpio
pin:
number: D1
inverted: False
mode: INPUT_PULLUP
name: "Wemos Test Button"
on_press:
then:
- switch.toggle: led
- delay: 2s
- switch.toggle: led</nowiki>

{{template:top}}

ESPHome

2023-08-28T03:04:14Z

WikiSteve:

=Example Code=
:[[Esphome_example_blink|Blink]] 
:[[Esphome_example_delay|Delay]]

Esphome example blink

2023-08-27T13:55:10Z

WikiSteve:

You would think that blinking an LED is a no-brainer, but in ESPHome there are many methods that you can use to blink an LED on a GPIO port. 
The most complex is to use a PWM output, but I just wanted to blink an LED. 

<nowiki># Blink the green LED on D5 (GPIO14)
output:
- platform: gpio
pin:
number: D5
mode: output
id: greenLED

interval:
- interval: 500ms
then:
- output.turn_on: greenLED
- delay: 250ms
- output.turn_off: greenLED</nowiki>

=Navigation=
[[ESPHome|Return to the ESPHome page]]

Esphome example blink

2023-08-27T13:54:16Z

WikiSteve:

ESPHome

2023-08-27T13:48:51Z

WikiSteve: Created page with "=Example Code= :Blink "

=Example Code=
:[[Esphome_example_blink|Blink]]

Esphome example blink

2023-08-27T13:47:03Z

WikiSteve: Created page with " <nowiki># Blink the green LED on D1 (GPIO4) output: - platform: gpio pin: number: D3 mode: output id: greenLED interval: - interval: 500ms then: - output.turn_on: greenLED - delay: 250ms - output.turn_off: greenLED</nowiki>"

<nowiki># Blink the green LED on D1 (GPIO4)
output:
- platform: gpio
pin:
number: D3
mode: output
id: greenLED

interval:
- interval: 500ms
then:
- output.turn_on: greenLED
- delay: 250ms
- output.turn_off: greenLED</nowiki>

Wikihelp

2023-08-27T13:25:12Z

WikiSteve: Created page with "Consult the [https://www.mediawiki.org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software. == Getting started == * [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list] * [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ] * [https://lists.wikimedia.org/postorius/lists/mediawiki-announce.lists.wikimedia.org/ MediaWiki release mailing list] * [http..."

Consult the [https://www.mediawiki.org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software.

== Getting started ==
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]
* [https://lists.wikimedia.org/postorius/lists/mediawiki-announce.lists.wikimedia.org/ MediaWiki release mailing list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Localisation#Translation_resources Localise MediaWiki for your language]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Combating_spam Learn how to combat spam on your wiki]