Esphome example switch: Difference between revisions
Jump to navigation
Jump to search
(Created page with "This example shows a toggle switch. It is either on or it's off. That is the LED follows the switch state. <nowiki># A physical switch or button should be a binary sensor if you are detecting something like grounding the pin. # Physical Button on D1 (GPIO5) binary_sensor: - platform: gpio pin: number: D1 inverted: False mode: INPUT_PULLUP name: "Wemos Test Button" on_press: then: - switch.turn_on: led on_release:...") |
(No difference)
|
Revision as of 23:10, 27 August 2023
This example shows a toggle switch. It is either on or it's off. That is the LED follows the switch state.
# A physical switch or button should be a binary sensor if you are detecting something like grounding the pin.
# Physical Button on D1 (GPIO5)
binary_sensor:
- platform: gpio
pin:
number: D1
inverted: False
mode: INPUT_PULLUP
name: "Wemos Test Button"
on_press:
then:
- switch.turn_on: led
on_release:
then:
- switch.turn_off: led